Old rev 1.0 iMX6 CPUs not supported

We've received reports of problems with our demo kernels on boards with a rev 1.0 iMX6 CPU. If you encounter problems, please first check the CPU revision of the iMX6 on your board.

You can do this by breaking into the bootloader menu, type 'B' to get to the bootloader shell, then type 'i' followed by ENTER and check the number after 'Revision'. If this number is smaller than 1.1 you will not be able to successfully run our demo kernels on your board. Press 'x' or 'q' followed by ENTER to exit the bootloader shell.

The reason we do not support revision 1.0 iMX6 CPUs is simply because we do not have any board with a rev 1.0 CPU on-board, and thus have not been able to test our BSP with rev 1.0 CPUs. If you have an old board and want us to add support for rev 1.0 CPUs, please contact us.

System Information
Processor                          = iMX6 Quad (4 cores)
Speed grade                        = 996 MHz
Temperature grade                  = Automotive -40 to 125C
Revision                           = 1.2
Silicon revision                   = 1.0
SOC version                        = 1.0
Fuse MAC                           = 00:00:00:00:00:00
USB VID/PID                        = 0000/0000
GP1                                = 0x00000000
GP2                                = 0x00000000
64 bit UID                         = XXXXXXXXXXXXXXXXX
256 bit SRK                        = 0000000000000000000000000000000000000000000000000000000000000000
SRC Reset Status Register          = 0x00000001